BESOCMT
The machine uses a rod tightening combination frame structure, with sufficient strength and rigidity; The slider uses a rail guide;
machine and slider are welded steel, the material is Q235-A, using carbon dioxide gas shielded arc welding, the weld should be ground smooth, no weld slag and streaming scars, remove inner stress after weld. Columns guideway using high-quality materials, the guide portion after quenching hardness of HRC50 or more, good wear resistance.
Tope beam, worktable, left and right columns, sliders use Q235-A welded, remove inner stress after weld.
Machine Body
The machine uses a rod tightening combination frame structure, with sufficient strength and rigidity; The slider uses a rail guide;
machine and slider are welded steel, the material is Q235-A, using carbon dioxide gas shielded arc welding, the weld should be ground smooth, no weld slag and streaming scars, remove inner stress after weld. Columns guideway using high-quality materials, the guide portion after quenching hardness of HRC50 or more, good wear resistance.
Tope beam, worktable, left and right columns, sliders use Q235-A welded, remove inner stress after weld.
Oil Cylinder
Solo cylinder structure which is disposed on the upper beam hole, cylinder block uses 45 # forged steel,
material uniformity. Plunger rod surface hardening hardness is HRC45-50. The cylinder finishing with high-precision machine tools,
cylinder bore after the refining process to increase surface hardness and wear resistance
Hydraulic System
(1)Hydraulic system adopts advanced cartridge valve integrated system, the valve big flow, anti-pollution, flexible control,
reliable performance, easy maintenance. Pilot solenoid valves are made of high-quality products.
(2)Hydraulic system working pressure is 25MPa, the main valve should be two-way cartridge valves. Hydraulic system is with
overload protection devices. Hydraulic piping system
design reasonable, piping arranged in an orderly and tidy, high and low-pressure pipeline is an obvious color distinction. The hydraulic piping system should be reliable sealing flange connection priority connections, piping layout and
tidy, and the use of shock and vibration-resistant gauge pipe clamps, pipe phosphate processing, and then coated with rust-resistant paint.
(3)How to work Fixed stroke and fixed pressure; hydraulic machine operation: adjust, single cycle,
jog on the mold and work with automatic feeding.
(4)Fuel tank is divided into two parts, oil zone and oil back zone. Tank is a steel plate welded structure, which is installed with the oil level gauge, air filter, etc., tank was after pickling, passivation and anti-rust treatment, with
separate oil filtration devices, and enables filtering device blockage accident alarm. Tank with oil level indication and oil level gauge (upper and lower) alarm device.
(5)Filling valve Description: filling valve is to provide the master cylinder to draw or drain oil.
Safety Protection System
(1)stationary and emergency stop button: When an exception occurs press the “stationary” button
presses all the work stopped; press “stop” buttons, including motors are stopped.
(2)wo-hand operation button: hands downlink synchronization time 0.5 ~ 1S.
(3)the hydraulic circuit supporting Insurance: To prevent uncontrolled downward slide in the master cylinder piston hydraulic bearing inferior vena setting interlock circuit, to ensure safety.
(4)overload protection: hydraulic system with hydraulic safety valve to ensure the press not overloaded work.Hydraulic Press
1, high efficiency and energy saving, electricity consumption is 30%-50% energy saving than ordinary motors.
2, low noise, noise can be controlled at about 60 decibels.
3, working position, speed, pressure can be adjusted infinitely.
4, rapid response, pressure, position repeatability is high.
5, high efficiency, multiple protection inside, the failure rate is extremely low.
6, 12 hours of continuous work does not require cooling oil temperature.
7. Pipes and joints adopt SEA international standards to prevent oil leakage from pipes.
8, using button centralized control, (fixed / constant pressure) two control methods, (adjustment / automatic) two modes of operation.
9, European CE standard hydraulic system and electrical safety IP54 grade.
| Type | Unit | 63T | 100T | 160T | 200T | 315T | 630T | 1000T | 2000T |
| Ejecting force | KN | 100 | 200 | 250 | 400 | 630 | 1000 | 1200 | 2000 |
| Nominal pressure | KN | 630 | 1000 | 1600 | 2000 | 3150 | 6300 | 10000 | 20000 |
| Slider Stroke | mm | 500 | 500 | 500 | 700 | 800 | 900 | 900 | 1400 |
| Max.opening height | mm | 700 | 900 | 900 | 1120 | 1250 | 1500 | 1500 | 1600 |
| Ejecting Stroke | mm | 160 | 200 | 200 | 250 | 300 | 300 | 400 | 450 |
| Power of motor | KW | 5.5 | 7.5 | 15 | 18.5 | 22 | 45 | 68 | 134 |
| Max.Working pressure | Mpa | 25 | 26.2 | 26 | 25 | 25 | 26 | 26 | 27 |
| Table size(F.B.) | mm | 500 | 580 | 800 | 900 | 1200 | 1500 | 1600 | 2000 |
| Table size(L.R.) | mm | 500 | 710 | 800 | 900 | 1200 | 1500 | 1600 | 2800 |
| Idle stroke | mm/s | 76 | 100 | 100 | 100 | ＞100 | ＞100 | ＞100 | ＞100 |
| Pressing | mm/s | 10 | 8-15 | 8-15 | 8-15 | 8-15 | 10 | 12 | 10 |
| Return | mm/s | 60 | 60 | 60 | 70 | 70 | 65 | 80 | ＞75 |
| Total Weight | T | 2.5 | 4 | 7 | 12 | 15 | 38 | 48 | 145 |
Parameters ( Hydraulic Press,Hydraulic Press Machine For Sale)
This series of hydraulic presses are suitable for drawing, bending, flagging, cold extruding, blanking precesses for materials, straightening,press-in and forming precesses for powder and abrasive products, plastic and insulation materials.
English
Русский
Español